ST72F325J6 Microcontroller Flash Memory Program Code Extraction refers to crack mcu st72f325J6 tamper resistance system and then copy chip heximal file to new st72f325j6;
Notes:
- The contents of the I/O port DR registers are readable only in output configuration. In input configuration, the values of the I/O pins are returned instead of the DR register contents.
- The bits associated with unavailable pins must always keep their reset value.
- The Timer A Input Capture 2 pin is not available (not bonded).
- In Flash devices:
The TAIC2HR and TAIC2LR registers are not present. Bit 5 of the TACSR register (ICF2) is forced by hardware to 0. Consequently, the corresponding interrupt cannot be used when decrypting st72f321bk microprocessor flash memory program.
The Timer A Output Compare 2 pin is not available (not bonded).
The TAOC2HR and TAOC2LR Registers are write only, reading them will return undefined values. Bit 4 of the TACSR register (OCF2) is forced by hardware to 0. Consequently, the corresponding interrupt cannot be used.
Caution: The TAIC2HR and TAIC2LR registers and the ICF2 and OCF2 flags are not present in Flash de- vices but are present in the emulator. For compatibility with the emulator, it is recommended to perform a dummy access (read or write) to the TAIC2LR and TAOC2LR registers to clear the interrupt flags only after decoding st72f321r9 processor memory file.