Recover MCU PIC16F77 Eeprom

Recover MCU PIC16F77 Eeprom content and copy heximal to new Microcontroller PIC16F77 for microprocessor cloning, the status of MCU PIC16F77 will be reset from locked to unlocked one;

Program Memory Organization:

The PIC16F7X devices have a 13-bit program counter capable of addressing an 8K word x 14-bit program memory space. The PIC16F77/76 devices have 8K words of FLASH program memory and the PIC16F73/74 devices have 4K words. The program memory maps for PIC16F7X devices are shown in Figure 2-1. Accessing a location above the physically implemented address will cause a wraparound. in the PICmicro Mid-Range Reference Manual.

The 28-pin devices have 11 interrupts, while the 40/44-pin devices have 12

· The 28-pin devices have 5 A/D input channels, while the 40/44-pin devices have 8

· The Parallel Slave Port is implemented only on the 40/44-pin devices

The RESET Vector is at 0000h and the Interrupt Vector is at 0004h after Microcontroller PIC18F66K90 heximal attacking

Each bank extends up to 7Fh (128 bytes). The lower locations of each bank are reserved for the Special Function Registers. Above the Special Function Registers are General Purpose Registers, implemented as

static RAM. All implemented banks contain Special

Function Registers. Some frequently used Special

Function Registers from one bank may be mirrored in

another bank for code reduction and quicker access. implemented address will cause a wraparound. in the PICmicro Mid-Range Reference Manual

The 28-pin devices have 11 interrupts, while the 40/44-pin devices have 12

· The 28-pin devices have 5 A/D input channels, while the 40/44-pin devices have 8

· The Parallel Slave Port is implemented only on the 40/44-pin devices.