Copy Locked R5F212DASNFP MCU Flash Data needs to crack RENESAS microcontroller fuse bit of flash memory, and then extract embedded firmware from microprocessor flash memory;
16 bits × 1 (with 4 capture/compare registers)
Timer mode (input capture function, output compare function), PWM mode (output 3 pins), PWM2 mode (PWM output pin)
16 bits × 2 (with 4 capture/compare registers)
Timer mode (input capture function, output compare function), PWM mode can be used for renesas locked mcu R5F212AASD memory data copying;
(output 6 pins), reset synchronous PWM mode (output three-phase waveforms (6 pins), sawtooth wave modulation), complementary PWM mode (output three-phase waveforms (6 pins), triangular wave modulation), PWM3 mode (PWM output 2 pins with fixed period)
8 bits × 1, Real-time clock mode (count seconds, minutes, hours, days of week), output compare mode
copiar dados de flash MCU R5F212DASNFP bloqueados precisa quebrar o microcontrolador RENESAS fundir bit de memória flash e, em seguida, extrair firmware incorporado da memória flash do microprocessador;
16 bits × 1 (with capture/compare register pin and compare register pin) Input capture mode, output compare mode to dump Renesas protected mcu r5f212a7sd flash program.
R8C/Tiny series core
- Number of fundamental instructions: 89
- Minimum instruction execution time:
50 ns (f(XIN) = 20 MHz, VCC = 3.0 to 5.5 V)
100 ns (f(XIN) = 10 MHz, VCC = 2.7 to 5.5 V)
200 ns (f(XIN) = 5 MHz, VCC = 2.2 to 5.5 V)
- Multiplier: 16 bits × 16 bits ® 32 bits
- Multiply-accumulate instruction: 16 bits × 16 bits + 32 bits ® 32 bits
Operation mode: Single-chip mode (address space: 1 Mbyte)