Break STM8S103K3U6 MCU Protection can disable the security fuse bit of microcontroller stm8s103k3 through hacking technique and then readout the embedded firmware from stm8s103k3u6 flash and eeprom memory;
For efficient power management, the application can be put in one of four different low- power modes. You can configure each mode to obtain the best compromise between the lowest power consumption, the fastest start-up time and available wakeup sources.
Wait mode: In this mode, the CPU is stopped, but peripherals are kept running. The wakeup is performed by an internal or external interrupt or reset.
romper la protección del MCU STM8S103K3U6 puede desactivar el bit de fusible de seguridad del microcontrolador stm8s103k3 a través de la técnica de piratería y luego leer el firmware integrado de la memoria flash y eeprom stm8s103k3u6;
Active halt mode with regulator on: In this mode, the CPU and peripheral clocks are stopped. An internal wakeup is generated at programmable intervals by the auto wake up unit (AWU) to clone stm8s103f2 memory source code.
The main voltage regulator is kept powered on, so current consumption is higher than in active halt mode with regulator off, but the wakeup time is faster. Wakeup is triggered by the internal AWU interrupt, external interrupt or reset.
Active halt mode with regulator off: This mode is the same as active halt with regulator on, except that the main voltage regulator is powered off, so the wake up time is slower when copying microprocessor stm8s003f3 flash memory content.
Halt mode: In this mode the microcontroller uses the least power. The CPU and peripheral clocks are stopped, the main voltage regulator is powered off. Wakeup is triggered by external event or reset.